{"product_id":"ford-f-250-80a03e","title":"Ford F-250","description":"\u003cp\u003eOverview\u003c\/p\u003e\u003cp\u003eThis asset is a neutral Ford F-250–style full-size pickup provided as a single HO (1:87) master STL intended for hobbyist printing, layout placement and kitbashing. The geometry emphasizes a contemporary heavy-duty pickup silhouette — a taller crew\/supercab cabin with a clearly defined cab-to-bed junction, short-to-mid bed footprint and robust wheel arches — while intentionally simplifying or removing fine manufacturer-specific trademarks to produce a license-safe base mesh suitable for modification.\u003c\/p\u003e\u003cp\u003eVisible features and geometry notes\u003c\/p\u003e\u003cp\u003e- Cab profile: the mesh reads as a crew (super) cab arrangement with four full doors and a taller passenger compartment. Roofline, windshield rake and door seams are modeled to allow separation if you want to cut the cab from the body for interior detailing or alternate cab swaps.\u003c\/p\u003e\u003cp\u003e- Bed shape and cavity: the bed is a short-to-mid length footprint with an open cavity and accessible sidewalls. The bed interior is left simple and accessible so common hobby accessories (toolboxes, crates, drums) can be positioned logically or so the bed can be hollowed and prepared for casting or resin venting.\u003c\/p\u003e\u003cp\u003e- Wheel arches and hubs: exterior wheel arches are pronounced and sized to accept common hobby wheelsets with generous hub clearances. Hub openings are simplified and have been left with extra clearance to aid axle fitment after minor cleanup.\u003c\/p\u003e\u003cp\u003e- Front\/rear treatment: headlamp and grille shapes are suggested but intentionally generalized; badges and manufacturer trademarks are smoothed or removed to avoid precise brand replication. Bumpers and lower valances are present but simplified to avoid fragile thin structures at HO scale.\u003c\/p\u003e\u003cp\u003e- Underbody and shell: the underbody is merged into a watertight single shell with low surface detail to improve slicer behavior. Very thin structural elements that would fail reliably at HO were reinforced or blended to increase print success.\u003c\/p\u003e\u003cp\u003eWhat you receive\u003c\/p\u003e\u003cp\u003e- One master STL supplied at 1:87 (HO). The downloadable package contains this master file along with a simple conversion table and recommended uniform scale factors so you can scale the HO master in your slicer for other scales (for example use the ratio 87\/48 to approximate 1:48). No additional pre-scaled files are provided.\u003c\/p\u003e\u003cp\u003ePrintability and finishing guidance\u003c\/p\u003e\u003cp\u003e- Master scale: file coordinates and measurements are prepared as an HO \/ 1:87 master. Use the included conversion guidance to uniformly scale the file in your slicer for other scales.\u003c\/p\u003e\u003cp\u003e- Resin printing: if printing in resin, consider hollowing the bed and adding vents\/drain holes to avoid resin traps and reduce wasted material. The bed cavity is intentionally left accessible to make this straightforward.\u003c\/p\u003e\u003cp\u003e- FDM printing: the mesh is a single watertight shell; for FDM printing you may prefer to split the body (cab\/body or body\/bed) to control support placement and seam lines and to reduce bridging across the bed cavity.\u003c\/p\u003e\u003cp\u003e- Fitment: wheel hub openings accept standard hobby axles with some cleanup. Expect light sanding, filing and pinning when mating aftermarket wheels or swapping bed variants.\u003c\/p\u003e\u003cp\u003eKitbashing and modification\u003c\/p\u003e\u003cp\u003e- Cab separation: seams are modeled to allow separation for interior work or to swap in alternative cabs. The cab-to-bed junction is distinct and straightforward to modify for lengthening or shortening the bed.\u003c\/p\u003e\u003cp\u003e- Bed conversions: the bed geometry is intentionally simple to allow conversion to flatbeds, service beds, or to accept printed accessories such as toolboxes, ladder racks or tanks.\u003c\/p\u003e\u003cp\u003e- Casting readiness: interior regions are left simplified to serve as a practical starting point for creating resin masters after hollowing, adding vents and drain holes, and addressing casting undercuts.\u003c\/p\u003e\u003cp\u003eUse cases\u003c\/p\u003e\u003cp\u003e- Model railroading: immediate fit for contemporary HO layouts as roadside, work, or support vehicles.\u003c\/p\u003e\u003cp\u003e- Dioramas: modern urban, light industrial, construction support or service scenes where a neutral pickup is required for storytelling.\u003c\/p\u003e\u003cp\u003e- Kitbashing: a practical starting mesh for hobbyists who wish to produce alternate beds, add equipment, or create fictional commercial variants.\u003c\/p\u003e\u003cp\u003eLimitations and review note\u003c\/p\u003e\u003cp\u003eThis asset was produced in a legacy pipeline and automated identity confidence is low. The mesh is intentionally non-year-specific and omits precise factory details and badges; it is not a licensed accurate reproduction of a particular model year. If you require exact grille templates, headlamp outlines or factory-accurate bed variants for a specific production year, request a custom revision.\u003c\/p\u003e\u003cp\u003eCompatibility and recommendations\u003c\/p\u003e\u003cp\u003e- Best fit: HO \/ 1:87 model railroading and modern-era dioramas.\u003c\/p\u003e\u003cp\u003e- Recommended printing: hobby resin for fine exterior detail; FDM with splitting for easier supports.\u003c\/p\u003e\u003cp\u003e- Post-processing: standard sanding, light filling and pinning for aftermarket wheel fitment.\u003c\/p\u003e\u003cp\u003eConversion reminder\u003c\/p\u003e\u003cp\u003eOnly the single 1:87 (HO) master STL is included in the package. Conversion guidance is provided in the download to scale the master for other common scales. We do not supply pre-scaled files for other scales.\u003c\/p\u003e\u003cp\u003eSupport\u003c\/p\u003e\u003cp\u003eFor requests to split the body, add bed accessories, or update grille\/tail geometry for a specific year, contact support to request a custom revision.\u003c\/p\u003e","brand":"Miniature Reality","offers":[{"title":"1:87","offer_id":44204325535831,"sku":null,"price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2078\/1911\/files\/camera001_33a02b06-0948-465e-8c3a-ff5f0f790b57.png?v=1787888305","url":"https:\/\/miniaturereality.com\/products\/ford-f-250-80a03e","provider":"Miniature Reality","version":"1.0","type":"link"}