{"product_id":"modern-sedan-car-11740c","title":"Modern Sedan Car","description":"\u003cp\u003eOverview\u003c\/p\u003e\u003cp\u003eThis sculpt represents a neutral contemporary four-door compact-to-midsize sedan optimized to read clearly at hobby scales. The shape emphasizes silhouette recognition at typical viewing distances while avoiding brand-identifying cues. The file is supplied as a single 1:87 (HO) master STL intended for hobby use in HO model railroad layouts, modern street dioramas, parking scenes, and small display fleets.\u003c\/p\u003e\u003cp\u003eVisible features and design choices\u003c\/p\u003e\u003cp\u003e- Silhouette and proportions: The sedans proportions present a low roofline, balanced cabin-to-hood ratio, and a gently tapered trunk. These proportions were chosen so the vehicle reads as a contemporary sedan at short-to-medium viewing distances without fine badges or trim.\u003c\/p\u003e\u003cp\u003e- Lamp and panel strategy: Headlamp and taillamp areas are modeled as shallow, robust recesses rather than thin separate lenses. Door seams and panel transitions are suggested with blunted geometry to minimize fragile, tiny features at HO scale. This approach preserves the visual read while increasing print survivability.\u003c\/p\u003e\u003cp\u003e- Bumpers and body integration: Front and rear bumper volumes are integrated into the body shell to reduce thin appendages that commonly break at small scales. Underbody details are simplified and unified with the lower body to provide a watertight mesh compatible with hobbyist slicers and to simplify mounting or axle insertion.\u003c\/p\u003e\u003cp\u003e- Wheel arches and mounting: Wheel arches are relieved and sized to accept glue-in wheel sets or simple axle arrangements; internal clearance is left for varied hobby tolerances. Mirror bosses are intentionally thickened at the base to survive handling; mirror stalks are simplified to avoid fragile filigree.\u003c\/p\u003e\u003cp\u003eWhat you receive\u003c\/p\u003e\u003cp\u003e- One canonical master STL prepared at 1:87 (HO) scale. Miniature Reality provides only this single HO master. The download includes a concise conversion note explaining the scale factors and practical steps to scale the master to other ratios (for example, converting from 1:87 to 1:72 or 1:160). We do not supply multiple pre-scaled STLs; use the included conversion note or your slicer to produce alternate sizes.\u003c\/p\u003e\u003cp\u003ePrinting guidance (HO master)\u003c\/p\u003e\u003cp\u003eThis sculpt emphasizes silhouette and robustness over micro-detail. For filament printers, recommended layer heights are 0.10–0.20 mm depending on nozzle and finish preferences. Use light supports at pronounced overhangs such as lower bumper edges and under mirror bosses. Mirror bosses are thickened but may still benefit from minimal support or careful orientation. Allow approximately 0.5–1.0 mm clearance for hub fit depending on your printer tolerance if mounting aftermarket wheels or axles. The unified body shell and simplified lamp recesses make the part forgiving for both filament and resin printing when tolerances are observed.\u003c\/p\u003e\u003cp\u003eFinishing and customization\u003c\/p\u003e\u003cp\u003eThe unbranded shape is intended for hobbyist finishing and kitbashing. Suggested customizations include hand-painting lamp recesses, applying tiny license plate decals, adding styrene trim strips, or replacing simplified mirror stalks with thicker printed or metal posts for durability. For stronger mirrors consider post-print replacement.\u003c\/p\u003e\u003cp\u003eIntended uses and layout advice\u003c\/p\u003e\u003cp\u003eThis sedan suits modern urban and suburban scenes, parking lots, street-side dioramas, HO model railroad stations, and mixed fleet displays. Because of its generic identity it can be used in batch runs where consistent silhouettes are required or mixed into differing color and trim schemes to create believable variety in contemporary scenes.\u003c\/p\u003e\u003cp\u003eIdentity and provenance\u003c\/p\u003e\u003cp\u003eThis sculpt originates from a legacy clay-study workflow and intentionally avoids specific manufacturer identifiers. The shape reads as a generic contemporary four-door sedan; no verified prototype or brand match is claimed. Identity confidence is intentionally low for brand provenance.\u003c\/p\u003e\u003cp\u003eConversion reminder\u003c\/p\u003e\u003cp\u003eMiniature Reality ships a single 1:87 (HO) master STL. The included conversion note explains scale factors and practical slicer adjustments for other hobby scales. If you require a bespoke master locked to a different scale or a brand-specific variant, contact Miniature Reality to request a custom order.\u003c\/p\u003e","brand":"Miniature Reality","offers":[{"title":"1:87","offer_id":44198615941207,"sku":null,"price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2078\/1911\/files\/camera001_0283fe66-c1eb-4bf1-9be9-1243fdbe4e2a.png?v=1788121821","url":"https:\/\/miniaturereality.com\/products\/modern-sedan-car-11740c","provider":"Miniature Reality","version":"1.0","type":"link"}