Low-Poly Kitchen Stand Mixer — 1:87 (HO) master STL
Overview
This asset is a low-polygon interpretation of a household tilt-head stand mixer sculpted to read clearly at small scales. The piece emphasizes silhouette, negative space and stable grounding over fine mechanical detail: a pronounced tilt-head profile with hinge slope, a recessed bowl zone (the bowl is modeled as a recessed pocket rather than a separable insert), and a compact rounded base designed to sit flush on miniature counters and shelving. Faceted planes and simplified curvature preserve a stylized low-poly aesthetic and reduce polygon count for predictable slicing and fast printing at HO and nearby scales.
Key visible features
- Tilt-head silhouette: a raised head section with a distinct hinge slope above the bowl zone that reads as a tilt-head mechanism common to consumer mixers; this silhouette ensures recognizability even behind glass or at a distance.
- Recessed bowl zone: the mixing bowl is shown as an integrated recess beneath the head; the rim and surrounding negative space are modeled to keep the bowl visually separate at small scales.
- Rounded compact base: a short, curved base provides a stable contact patch for counters and prevents the prop from appearing top-heavy in small layouts.
- Low-poly faceting: planar faces and simplified curvature create crisp planes that photograph and paint well and keep vertex counts low for quick slicing.
- Beaters present but simplified: the beaters are indicated as stylized wire forms; they are not separate detachable parts in the provided master.
- Single-part mesh: the asset is delivered as one cohesive shell to simplify printing, placement and use as an interior detail.
What you get
- 1 x STL file: single master mesh scaled to 1:87 (HO).
- README: conversion note explaining uniform scaling for printing at other scales and orientation suggestions.
Scale and conversion note
The supplied master is sized to 1:87 (HO). To print at a different scale, scale the mesh uniformly in X/Y/Z by the ratio (87 / target_denominator) in your slicer (for example, to print at 1:48 scale, scale the master by 87/48 ≈ 1.8125×). Always use uniform scaling to maintain proportions. This listing intentionally provides one master STL at HO; no additional scale STLs are included.
Printing guidance
- Orientation: orient the mixer with the rounded base on the build plate so the base forms the primary contact; this minimizes supports and preserves the visible faceting on the head and bowl rim.
- Supports: light supports under the head and along the bowl rim can help depending on your printer and chosen layer height. Because the mesh is single-part, consider support placement to avoid fusing the recess detail.
- Layer height: for HO-sized prints with readable faceted planes we recommend layer heights in the 0.12–0.20 mm range; reduce to 0.08–0.12 mm for higher quality display pieces.
- Shells and infill: 2–3 perimeters and 10–20% infill are sufficient at HO; increase shell count and infill for larger-scale prints or for heavier handling.
Finishing and painting
The flat planes accept primer and paint well. Primer and careful dry-brushing will accentuate faceted edges and bring out the tilt-head silhouette and bowl rim. The recessed bowl pocket reads well when shaded lightly, making this piece effective as a background prop in bakery windows, cafe counters or domestic interiors.
Intended uses and scene suggestions
This mixer is designed as a compact countertop prop for contemporary domestic scenes: bakery display windows, café counters, modern dollhouse kitchens, HO passenger car buffet interiors and table-top gaming vignettes where a small recognizable appliance improves scene realism. Its simplified, readable profile makes it suitable for placement behind glass or at normal viewing distances where form and function are more important than mechanical accuracy.
Provenance and review note
This asset was finalized from a legacy automated stub (automation engine: legacy_meshref_stub). Metadata and measurement provenance are limited and identity confidence is intentionally low (identity confidence 0.3). If you require brand-specific styling, separate removable parts (bowl or beaters) or exact prototype dimensions, request a custom revision. The master intentionally provides a single unified STL for ease of use; commission multi-part or high-detail variants if needed.
License
This listing supplies a printable STL intended for hobbyist and display use. See Miniature Reality license terms at checkout for commercial usage restrictions.
Miniature Reality Personal-Use License (No AI / No Resale)
- Allowed: personal printing for your own layouts, dioramas, tabletop games, and personal display.
- Not allowed: sharing or distributing the digital files (free or paid), re-uploading to any site, bundling, remix resale, or selling/redistributing printed outputs.
- Not allowed: using the files (or derivatives) to train, fine-tune, test, or feed any AI/ML system (including dataset creation).
- Not allowed: commercial use of any kind without a separate written commercial license from Miniature Reality.
- Note: digital files may include purchaser-linked identifiers / forensic watermarking to help investigate unauthorized distribution.
