High-detail 3D-printable scale model of the Fisker Alaska (2025) pickup, optimized for use in dioramas, model railroading, display and hobby painting. The file set includes a printable body, separate wheels, and optional mirrors/trim pieces to improve print reliability and finish. Printing notes - Recommended printers: MSLA resin or FDM. Resin gives the best fine detail; FDM works well at larger scales. - Resin settings: 50–100 µm layer height, generate light supports for mirrors and wheel wells, orient body upside-down or on its side to minimize visible supports. - FDM settings: 0.12–0.2 mm layer height, 0.4 mm nozzle, 10–20% infill. Use supports for thin overhangs (mirrors, bumpers) and consider printing wheels separately. - Minimum recommended wall thickness: 0.8–1.0 mm for FDM; resin prints can use thinner details but allow for painting/sanding. - Post-processing: sand support marks, use primer before painting. Small parts bond well with cyanoacrylate (superglue) or model cement. Scales and use - Printable as-is or scaled to common hobby scales (1:18, 1:24, 1:43, 1:64, HO 1:87, N 1:160). For best detail at small scales, use resin printing. - Ideal for modern urban and transportation dioramas, layout rolling stock scenes, or display on a shelf. Notes - This is a hobby model file and is not an official product from the vehicle manufacturer. Review any copyright or trademark restrictions before commercial use.